ANTAIRA LNX-2012GN-SFP, Руководство пользователя

Страница: 27 / 105

Antaira Technologies - Industrial Ethernet Switches
LNX-2012G-SFP Series User Manual V1.0
20
Label Description
Local Port The port on which the LLDP frame was received.
Chassis ID The Chassis ID is the identification of the neighbor's LLDP frames.
Remote Port ID
The Remote Port ID is the identification of the neighbor port.
System Name System Name is the name advertised by the neighbor unit.
Port Description
Port Description is the port description advertised by the neighbor
unit.
System
Capabilities
System Capabilities describes the neighbor unit's capabilities. The
possible capabilities are:
1. Other
2. Repeater
3. Bridge
4. WLAN Access Point
5. Router
6. Telephone
7. DOCSIS cable device
8. Station only
9. Reserved
When a capability is enabled, the capability is followed by (+). If the
capability is disabled, the capability is followed by (-).
Management
Address
Management Address is the neighbor unit's address that is used for
higher layer entities to assist the discovery by the network
management. This could for instance hold the neighbor's IP
address.
Click to refresh the page immediately.
Check this box to enable an automatic refresh of the page at
regular intervals.
5.2.5.2 LLDP Port Statistics
The LLDP Port Statistics page provides and overview of all LLDP traffic. There are global
counters that monitor the whole stack of LLDP traffic on the network segment, whereas the
LLDP statistical local counters reference only the counter on the selected switch.