ANTAIRA LNP-1002G-SFP-24 Series Скачать руководство пользователя

Страница: 19 / 23

Antaira Industrial Ethernet Switches

LNP-1002G-SFP-24 Series User Manual V1.0

4. Hardware Installation

4.1 Installation Steps

This section will explain how to install Antaira

’s LNP-1002G-SFP-24 series: 10-port industrial

PoE+ gigabit unmanaged Ethernet switch with 8*10/100/1000Tx (30W/Port), and 2*100/1000 SFP

slots; 12~36VDC.

Installation Steps

1. Unpack the industrial Ethernet switch from the original packing box.

2. Check if the DIN-Rail bracket is screwed on the industrial Ethernet switch.



If the DIN-Rail is not screwed on the industrial Ethernet switch, please refer to the

DIN-Rail Mounting

section for DIN-Rail installation.



If you want to wall mount the industrial Ethernet switch, please refer to the

Wall

Mounting

section for wall mounting installation.

3. To hang the industrial Ethernet switch on a DIN-Rail or wall, please refer to the

Mounting

Installation

section.

4. Power on the industrial Ethernet switch and then the power LED light will turn on.



If you need help on how to wire power, please refer to the

Wiring the Power Inputs

section.



Please refer to the

LED Indicators

section for LED light indication.

5. Prepare the twisted-pair, straight-through category 5 cable for Ethernet connection.

6. Insert one side of the RJ-

45 cable into switch’s Ethernet port and on the other side into the

networking device’s Ethernet port, e.g. switch PC or server. The Ethernet port’s (RJ-45) LED

on the industrial Ethernet switch will turn on when the cable is connected to the networking

device.



Please refer to the

LED Indicators

section for LED light indication.

7. When all connections are set and the LED lights all show normal, the installation is complete.

Содержание LNP-1002G-SFP-24 Series
























Результаты поиска

Содержание LNP-1002G-SFP-24 Series

Отзывы:

Похожие инструкции для LNP-1002G-SFP-24 Series

Бренды по названию

Популярные бренды

ANTAIRA LNP-1002G-SFP-24 Series, Руководство пользователя

Результаты поиска

Содержание LNP-1002G-SFP-24 Series

Отзывы:

Похожие инструкции для LNP-1002G-SFP-24 Series

Бренды по названию

Популярные бренды