Antaira Technologies - Industrial Ethernet Switches
LNP-0501-24 Series User Manual V2.0
16
7. Technical Specifications
Table 7.1 has the technical specifications for Antaira Technologies
’ LNP-0501-24 series: 5-port
industrial PoE+ unmanaged Ethernet switch with 4*10/100Tx (30W/port), 1*100Fx Fiber SC/ST
type connector (Multi-mode 2Km, or Single-mode 30Km); 12~36VDC (voltage booster).
Standard
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE802.3x Flow Control and Back Pressure
IEEE802.3at Power over Ethernet
Protocol
CSMA/CD
Transfer Rate
14,880pps for Ethernet port
148,800pps for Fast Ethernet port
Transmission Distance
Up to 100M for each Fast Ethernet port
Up to 2Km for Multi-mode Fiber port; or
Up to 30Km for Single-mode Fiber port.
MAC Address
2K Table Size
RJ45 (Ethernet) Port
4*10/100Tx (30W/Port) auto negotiation speed,
full/half duplex mode, and auto MDI/MDI-X connection
PoE Pin Assignment
RJ-45 port #1 ~ # 4 support IEEE 802.3at end-point,
alternative A mode.
Positive (VCC+): Pin 1, 2
Negative (VCC-): RJ-45 pin 3, 6
Data: Pin 1, 2, 3, 6
Fiber Port
1*100Fx SC/ST type connector:
Multi-mode (2Km) or Single-mode (30Km)
LED
Per unit
: Power1(Green), Power2(Green), Fault(Red)
Per port
: Link/Activity (Green)
PoE
: Feeding Power (Green)
Network Cable
10BaseT: 2-pair UTP/STP Cat. 3, 4, 5 cable
EIA/TIA-568 100-ohm (100m)
100BaseTX: 2-pair UTP/STP Cat. 5 cable
EIA/TIA-568 100-ohm (100m)
Over Current Protection
Single-Blown Fuse
Power Input
Redundant power DC 12~36 with connective
1*6-pin removable terminal block
