Antaira Technologies - Industrial Ethernet Switches
LMX-1002C-SFP Series Hardware Manual V1.0
9
Figure 2.7 - Transceiver to the SFP Module
Figure 2.8 - Transceiver Inserted
**Note:
The Gigabit combo ports (SFP/Copper) cannot be working at the same time.
The SFP port
has a higher priority than the copper port. When inserting a 100M or 1000M SFP transceiver
(which has connected to the remote device via fiber cable) into the SFP port, the connection of
the accompanying copper port link will be down.
Caution:
Please employ optional optical transceiver (SFP) that complies with IEC 60825-1
and classified as Class 1 laser product.
The small form-factor pluggable (SFP) is a compact optical transceiver used in optical
communications for both telecommunication and data communication applications. To connect the
transceiver and LC cable, please follow the steps below:
First, insert the SFP transceiver module into the SFP slot as shown below in
Figure 2.7
. Notice
that the triangle mark is at the bottom of the SFP slot.
Figure 2.8
shows that the SFP transceiver
module has been inserted.
Second, insert the fiber cable of the LC connector into the transceiver as shown in
Figure 2.9.
Figure 2.9 - LC Connector to the Transceiver
