19
3. Installation
3.1 Install Ethernet over VDSL2 Converter
The Ethernet over VDSL2 Converter does not require any
software configuration. Users can immediately use any feature
of this product simply by attached the cables and plug power
on. There is some key limitation on the Ethernet over VDSL2
Converter. Please check the following items:
n
EVC-3001:
The device is used for Point-to-Point connec-
tion only (Master device to Slave device) and has equipped
with 2 RJ-11 connectors for VDSL port. One for voice device
connection (like telephone) and the other one for network link
connection.
Depending on the quality of telephone line, the maximum
distance of one VDSL segment is 1.6km (5250ft) with AWG
24 telephone wires.
n
EVC-3010:
1 BNC connector and supports 50 or 75 ohm
cable. Depending on the quality of coaxial cable, the
maximum distance of one VDSL segment is 3.0km (9842ft)
with 5C coaxial cable.
The distance will change by the quality of telephone wires and
coaxial cables.
