Antaeus TALOS 55 Скачать руководство пользователя страница 3

Страница: 3 / 53

ANTAEUS TALOS 55

This manual was prepared to acquaint the owner, operator and serviceman with the operation

and maintenance of the vibratory driver/extractor. We suggest that this manual be carefully

studied before operating or undertaking any maintenance work on the unit.

This manual is organized into two major categories.

The first category is for routine OPERATING INSTRUCTIONS of the unit and includes a

GENERAL DESCRIPTION section, which presents a basic explanation of the driver/extractor

and some of its specifications. The MAINTENANCE AND ADJUSTMENT section should be

referred to periodically for normal servicing of equipment. All machines and equipment

require systematic, periodic inspection and maintenance, if they are to perform satisfactorily,

over a long period of time. The driver/extractor is primarily a vibrating machine and if not

given the best of care, or if improperly used and maintained, it is self-destructive. Therefore,

the unit should receive at least the same care and maintenance as other high quality

construction equipment.

The second category is for parts reordering and it includes both a PARTS LIST and a pictorial

drawing of the assembly, for easier determination of the required part. Refer to the

ORDERING PARTS section of the PARTS LIST for more specific procedures regarding parts

ordering. Adherence of the listed procedures will insure receipt of the required part(s) with

the minimal amount of delay or error.

PREFACE

Содержание TALOS 55






















































Результаты поиска

Содержание TALOS 55

Отзывы:

Бренды по названию

Популярные бренды

Antaeus TALOS 55, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание TALOS 55

Отзывы:

Бренды по названию

Популярные бренды