3
SAFETY MEASURES AND PRECAUTIONS
! Read the operating instructions carefully before use
! Charge only NiCd or NiMH batteries. NOT primary cells, Lead Acid, LiIon or LiPolymer batteries - Risk of Explosion and chemical danger
! Check the battery manufacturers instructions. Do not charge batteries with too high charging current. - Risk of Explosion and chemical danger
! Connect the charger to a suitable mains supply only.
! Connect the batteries with right polarity to the charger.
! When not in use, disconnect the battery from the charger and the charger from the mains.
! Do not charge hot batteries. Batteries must be at ambient temperature before charging.
! Do not expose the battery charger to rain, damp or hot conditions.
! Do not charge the batteries twice. Charging is only allowed after a prior discharge.
! Do not leave the charger unattended during operation.
! Do not open equipment or carry out repairs. Authorized personnel may only carry out repairs.
! Do not cover equipment or obstruct ventilation, otherwise it may over-heat. Do not expose to direct sunlight.
! Do not charge more than one battery pack simultaneously.
! Charge only cells of the same type and capacity as a battery pack.
! Keep batteries, battery charger and cables away from combustible materials.
! Avoid sparking as there maybe gases present from the batteries.
! Never place the charger inside the engine compartment. Keep leads away from moving parts.
TECHNICAL DATA
xBase Multi
Part. No. 151000020
Input voltage:
230 V 50 Hz
Battery Types:
4-10 NiCd cells
4-10 NiMH cells
Output 1
4,8 V DC / 700 mA; 12,0 V DC 600 mA
Output 2
4,8 V DC / 200 mA; 12,0 V DC 140 mA
Output 3
4,8 V DC / 150 mA; 12,0 V DC 110 mA
Output 4
4,8 V DC / 70 mA; 12,0 V DC 50 mA
Output 5
4,8 V DC / 70 mA; 12,0 V DC 50 mA
Weight:
530 g
Dimensions L x W x H in mm:
119 x 102 x 85
1_manual_xbase_multi_07-02.indd 3
1_manual_xbase_multi_07-02.indd 3
21.02.2007 17:13:56 Uhr
21.02.2007 17:13:56 Uhr
Prozessfarbe Schwarz
Prozessfarbe Schwarz
