3
SAFETY MEASURES AND PRECAUTIONS
! Read the operating instructions carefully before use
! Charge only NiCd / NiMH / Lead Acid or Li-Po/Li-Ion batteries. NOT primary cells - Risk of Explosion and chemical danger
! Check the battery manufacturer’s instructions. Do not charge batteries with too high charge current. - Risk of Explosion and chemical danger
! Connect the charger to a suitable power supply only.
! Connect the batteries with right polarity to the charger.
! When not in use, disconnect the battery from the charger and the charger from the mains.
! Do not charge hot batteries. Batteries must be at ambient temperature before charging.
! Do not expose the battery charger to rain, damp or hot conditions.
! Do not charge the batteries twice. Charging is only allowed after a prior discharge.
! Do not leave the charger unattended during operation.
! Do not open equipment or carry out repairs. Authorized personnel may only carry out repairs.
! Do not cover equipment or obstruct ventilation, otherwise it may over-heat. Do not expose to direct sunlight.
! Do not charge more than one battery pack simultaneously.
! Charge only cells of the same type and capacity as a battery pack.
! Keep batteries, battery charger and cables away from combustible materials.
! Avoid sparking as there maybe gases present from the batteries.
! Never place the charger inside the engine compartment. Keep leads away from moving parts.
TECHNICAL DATA
xBase Deluxe
Art. Nr. 151000010
Input voltage:
230 V/50 Hz 11-15 V DC
Battery Type's:
1-14 NiCd cells
1-14 NiMH cells
1-5 LiIon / LiPo cells
1-6 Lead Acid cells
Charge current:
0.1A – 5.0 A (max. 50 W)
Trickle charge (NiCd/NiMH):
100 mA
Weight:
590 gr
Dimensions L x W x H in mm:
119 x 102 x 85
1_manual_xbase_07-01.indd 3
1_manual_xbase_07-01.indd 3
11.01.2007 16:43:45 Uhr
11.01.2007 16:43:45 Uhr
Prozessfarbe Schwarz
Prozessfarbe Schwarz
