EN
112
3. Press SET to save the setting.
4. Press SET again to save and exit setting mode.
– If no settings are made in 5 seconds the setting is
automatically saved and the setting mode is closed.
Stopping timer 2
1. Press
a fourth time.
2
OFF
flashes.
2. The display shows
88 88
for hours and minutes.
3. Press to set the hour (0–23), press to set the minutes
(0–59).
4. Press SET to save the setting.
5. Press SET again to save and exit setting mode.
– If no settings are made in 5 seconds the setting is
automatically saved and the setting mode is closed.
In cooling mode
1. Press
once and then press
O
once to go to cooling
mode.
2. and
1
ON
flashes.
3. Set the timer times in the same way as for heating mode.
Control logic for two timer settings
• If the timer setting for start (ON) and shut-off (OFF) are set
to the same time, for example that 1ON and 1OFF are set to
8:00, the heat pump remains in the mode that was enabled
when the time was reached. Accordingly, if it is running it will
continue to run, if it was shut-off it will remain shut-off.
• If two timer settings have been made with the same time, so
that for example both 1ON and 2ON are 8:00, and both
1OFF and 2OFF are 10:00, the control unit works as if there
was just one timer setting.
• If the set time for start or shut-off are different for both timer
settings, so that for example both 1ON and 2ON are 8:00,
but 1OFF is 9:00 and 2OFF is 10:00, the heat pump works
from 8:00 to 9:00.
• If the timer setting is made for h hot tap water
mode or c hot tap water, hot tap water has priority
during the overlapping time. Example:
– Two timer settings for hot tap water mode 1ON-6:00
1OFF-10:30, 2ON-16:00 2OFF-22:00
– Two timer settings for cooling mode 1ON-10:00
1OFF-13:00, 2ON-14:00 2OFF-17:00
– The operating modes then switch according to:
6:00–10:00 for hot tap water mode, 10:30–13:00 for
cooling mode, 14:00–16:00 for cooling mode,
16:00–22:00 for hot tap water mode. Consequently,
hot tap water mode has priority during the overlapping
period for hot tap water + cooling. When the set water
temperature for hot tap water is reached the heat
pump switches to cooling mode. If the times do not
overlap, the heat pump works in each mode. The hot
tap water + heating mode work in the same way.
Содержание 416121
