Anslut 007018, Руководство по эксплуатации

Страница: 67 / 70

EN
67
SETTING THE STOP DELAY
1. Press the button TIMER OFF. The display
on the remote control shows TIMER OFF,
the last set stop delay and the status in h.
2. Press the TIMER OFF button again to set
the required stop delay. Each time you
press the button the setting increases
in steps of 0.5 hours up to 10 hours and
steps of 1 hour from 10 to 24 hours.
3. When the time for TIMER OFF is set a
signal is sent to the air conditioner after
0.5 seconds. After another 2 seconds the
h status disappears and the set point
temperature is shown again on the
display.
IMPORTANT:
Only the following times can be set:
0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0,
5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11,
12, 13, 14, 15,16,17, 18, 19, 20, 21, 22, 23 and
24 hours.
EXAMPLE OF TIMER SETTING
TIMER ON
(automatic start)
The TIMER ON function is useful, for example,
to start the air conditioner automatically
before you get home.
Example:
Follow the instructions below to set automatic
start in 6 hours:
1. Press the button TIMER ON. The display on
the remote control shows the last set start
delay and the status in h.
2. Press the TIMER ON button repeatedly
until 6:0h is shown on the display on the
remote control.
3. Wait about 3 seconds until the
temperature display is reset. The function
is now enabled.
FIG. 24
TIMER OFF (automatic switching off)
The TIMER OFF function is useful, for example,
to switch off the air conditioner automatically
after you have gone to bed.
Example:
Follow the instructions below to set automatic
stop in 10 hours.
1. Press the button TIMER OFF. The display
on the remote control shows the last set
stop delay and the status in h.
2. Press the TIMER OFF button repeatedly
until 10h is shown on the display on the
remote control.
3. Wait about 3 seconds until the
temperature display is reset. The function
is now enabled.
FIG. 25
AUTOMATIC STARTING AND STOPPING
(setting of TIMER ON and TIMER OFF at the
same time)
TIMER OFF – TIMER ON (on —
stop — start)
This function is useful, for example, to switch
off the air conditioner after you have gone to
bed and to start it again before you get up.
Example:
Follow the instructions below to set automatic
stop in 2 hours and automatic start in 10
hours.
1.
Press the button TIMER OFF.
2. Press the TIMER OFF button repeatedly
until 2.0h is shown on the display on the
remote control.
3. Press the button TIMER ON.
4. Press the TIMER ON button repeatedly
until 10h is shown on the display on the
remote control.
5. Wait about 3 seconds until the
temperature display is reset.
FIG. 26
TIMER ON – TIMER OFF
(off — start — stop)
This function is useful, for example, to start the
air conditioner before you get up and to switch
it off after you have left the house.
Example:
Follow the instructions below to set automatic