Ansell AlphaTec 66-320 model 151, Инструкция по эксплуатации

Страница: 29 / 36

29
11.6 EU type approval data
See EU type approval on page 8. Tests and classification according to EN 14325:2004,
EN 14325:2018 and EN 14126:2003.
It should be noted that all chemical testing was performed on swatches of suit material
under laboratory conditions, not under actual workplace environments. The user must
determine the applicability of the results obtained under laboratory conditions to the
actual conditions of use. Information presented is subject to change without notice.
SUIT MATERIAL AND SEAM - MECHANICAL DATA
PROPERTY TEST METHOD CLASS
REQUIREMENT
CLASS
(66-320)
CLASS
(66-330)
Abrasion resistance
EN 14325:2004/2018,
EN 530
> 2000 cycles 6 6
Flex cracking
resistance
EN 14325:2004,
ISO 7854:B Class 6: > 100000 cycles
Class 4: > 15000 cycles
4 6
Flex cracking
resistance
EN 14325:2018,
ISO 7854:B Class 6: > 50000 cycles
Class 5: > 20000 cycles
5 6
Flex cracking
@ - 30°C
ISO 7854:B
Class 6: > 4000
Class 4: > 1000
4 6
Tear resistance EN ISO 9073-4 > 60 N 4 4
Tensile strength EN ISO 13934-1
Class 6: > 1000 N
Class 4: > 250 N
4 6
Puncture resistance EN 863
Class 3: > 50 N
Class 2: > 10 N
2 3
Resistance to flame*
EN 13274-4
method 3 1 sec in flame, leak
tight afterwards
2 2
Antistatic properties,
garment material*
EN 1149-5:2018 t
50
< 4 sec Pass Pass
Seam strength EN ISO 13935-2
Class 6: > 500 N
Class 5: > 300 N
5 6
Limited flame
spread index (LFI)*
EN ISO 14116:2015
Afterflame/afterglow
< 2 s
1
Not
tested
* Not part of EN 14605 and EN 14325 requirements.