Ansell AlphaTec 66-320 model 151, Инструкция по эксплуатации

Страница: 21 / 36

21
9.5.2 Maintenance
Procedure :
1) Open the Bayonet ring and take out the
two O-rings.
2) Apply Molycote all around the groove.
3) If replacing the O-rings: Put the two new
O-rings into place.
4) Use a small paintbrush to spread the
grease evenly.
The two O-rings are different size:
The one with larger diameter goes
into the glove ring and the smaller
diameter into the sleeve ring.
4
When functioning properly, the safety
locking pin “snaps” into place when
pushing it with a finger. The pin may after
repeated use become too easy to push into
place, i.e. it gets worn out, and must then be
replaced.