Anritsu s332e, Руководство пользователя

Страница: 68 / 102

5-4 Preset Menu System Operations
5-8 PN: 10580-00252 Rev. J Site Master User Guide
5-4 Preset Menu
Key Sequence:
Shift, Preset (1)
5-5 Self Test
At power on, the Site Master runs through a series of quick checks to ensure that the system
is functioning properly. The System self test runs a series of tests that are related to the
instrument. The Application Self Test runs a series of tests that are related to the current
operating mode of the instrument.
If the Site Master is within the specified operating range with a charged battery and the self
test fails, contact your Anritsu Service Center at
http://www.anritsu.com/contact-us.
To start a self test when the system is already powered up:
1. Press the
Shift
key and then the
System
(8) key.
2. Press the
Self Test
submenu key. The Self Test results are displayed.
3. Press
Esc
to continue.
Preset: This key resets the instrument to the default starting conditions.
Save Setup: Opens the Save dialog box ( Figure 4-1 ) to name and save
the current operating settings, allowing them to be recalled later to return
the instrument to the state it was in at the time the setup was saved.
The saved setup can be named using the touch screen keyboard. Use the
Caps key to select an upper case letter. Use the
Left/Right directional
arrows to move the cursor position. Press Enter to save the setup.
Note: Set the File type as Setup. See “Save Menu” on page 4-9 for details.
Recall Setup: This key allows the selection and recall of a previously
stored instrument setup using the “Recall Menu” on page 4-12 . Use the
rotary knob, the Up/Down arrow keys, or the touchscreen to highlight the
saved setup, and press Enter . All current instrument settings are replaced
by the stored setup information.
Figure 5-8. Preset Menu
Recall
Setup
Preset
Save
Setup
Preset