Anritsu Network Master MT9090A Series, Руководство по эксплуатации, Страница: 36 / 200

1-4 MT9090A/MU909011A Network Master User’s Guide
If the rating is “PASS” or “Over Range” no
further testing is required. If the rating is
“FAIL” or “Under Range” follow the on-screen
instructions to proceed to the Fault Locate step.
Fault Locate Step –
-
Performs a connection check, if enabled on the
Preferences Setup screen. See “Connection
Check” on page 4-38.
-
Runs the OTDR Fault Locate test.
-
Provides a schematic view of the fiber under
test.
-
Reports the test results in both summary form
and in an event table.
Figure 1-2: Fault Locate Step – Summary screen
When the test has completed (when the Summary screen
appears) the OTDR trace can be viewed for further analysis
by pressing
View Trace ( F4 ).
For further details on Fault Locate testing see Chapter 4.