Anritsu Network Master MT9090A Series, Руководство по эксплуатации, Страница: 119 / 200

MT9090A/MU909011A Network Master User’s Guide 4-21
Event table (see “Fault Locate Parameters Setups” on pages
4-7 through 4-9).
Additional details for each event in the Event Table can be
obtained via the Event Description dialog. See “Event
Description Dialog” on page 4-24 for further information.
Figure 4-16: Event Table (Summary screen)
The Event Table displays the following:
•
Event number
•
Distance to the event
•
Type of event
•
dB loss for the event
•
Reflectance (if the event is a reflective event)
Note
Note
If the measured value cannot be obtained, for example,
because a fault point is being approximated, this is
displayed as “N/A”.
Distance to Event
The Distance field [Distance (m) or Distance (ft)] on the
Event Table represents the distance from the start of the trace
to the start of the feature. This value is reported in the
Distance Units selected on the Preferences Setup screen; “m”
for Meters or “ft” for Feet.