Anritsu MX371054A, Руководство по эксплуатации

Страница: 12 / 24

Chapter 1 Overview
1-2
1.1 Product Overview
The MX371054A Interference Waveform Pattern for LTE Receiver Test
(hereafter “this waveform pattern”) contains the QPSK modulation
waveform patterns of interference for LTE UE receiver test conforming to
the 3GPP standard and tables shown in Table 1.1-1.
Downloading this waveform pattern to the MG3710A/MG3710E Vector
Signal Generator (hereafter MG3710A/MG3710E) supports generation of
interference signals used at Receiver test items in Table 1.1-1.
Use of this waveform pattern requires a license corresponding to the
serial number of the MG3710A/MG3710E using the pattern. When using
this pattern on multiple MG3710A/MG3710E units, a license must be
purchased for each MG3710A/MG3710E unit using this pattern.
The MG3710A/MG3710E must include the minimum required
configuration shown in Table 1.1-1 when using this waveform pattern.
Table 1.1-1 3GPP standard, Table, Test Item, Min. configuration
Standard 3GPP TS 36.521-1 V16
UE conformance specification;
Radio transmission and reception;
Part 1: Conformance testing
Tables Table A.3.2-1: Fixed Reference Channel for Receiver
Requirements (FDD)
Table A.3.2-2: Fixed Reference Channel for Receiver
Requirements (TDD)
Receiver test
items
7.5 Adjacent Channel Selectivity
7.6.1 In-band blocking
7.8.1 Wide band Intermodulation
Minimum
required
configuration
MG3710A Vector Signal Generator
MG3710A-036 1st RF 100kHz to 6GHz
MG3710E Vector Signal Generator
MG3710E-036 1st RF 100kHz to 6GHz
If the MG3710A/MG3710E-066/166 2nd RF 100kHz to 6GHz is installed
on the MG3710A/MG3710E, the 2nd RF Output becomes available.