Anritsu MX371054A, Руководство по эксплуатации

Страница: 17 / 24

2.1 Preparing Waveform Pattern
2-3
2
Ho
w
to U
se W
av
ef
or
m
P
att
er
ns
2.1.2 Transferring waveform pattern to internal hard disk
There are two ways of transferring the waveform pattern created with
this waveform pattern to the internal hard disk:
● LAN
● External device such as USB flash drive
■ Transferring from PC to MG3710A/MG3710E via LAN
Two IQproducer™ tools can be used to transfer a waveform pattern to
the MG3710A/MG3710E via a LAN.
● Transfer & Setting Wizard
Start this wizard by clicking the Transfer & Setting Wizard button of
IQproducer™ or by selecting Simulation & Utility tab
→ Transfer &
Setting Wizard from the IQproducer™ after creating a waveform
pattern.
For details, refer to 4.7 “File Transfer and Loading to Memory Using
Transfer & Setting Wizard” in the MG3710A/MG3710E IQproducer™.
Transferring a waveform pattern to the internal hard disk of the
MG3710A/MG3710E, loading the waveform from the hard disk to the
waveform memory, and then outputting the waveform pattern can be
done using this wizard.
● Transfer & Setting Panel
This function is loaded by selecting Transfer & Setting Panel in the
Simulation & Utility tab of the IQproducer™. For details, refer to 5.2
“Transferring Waveform Pattern” in the
MG3710A/MG3710E
IQproducer™.
Specify the folder that contains the waveform pattern to transfer to
the MG3710A/MG3710E in the PC-side tree of Transfer & Setting
Panel.
■ Transferring via external device such as USB flash drive
For how to transfer a waveform pattern to the internal hard disk of the
MG3710A/MG3710E, refer to 7.3.6 “Copying external waveform pattern:
Copy” in the
MG3710A/MG3710E Operation Manual.