35 / 45
5.
5.
Measurement
Measurement
-
-
VCAT differential delay test (6)
VCAT differential delay test (6)
(6) Monitor VCAT differential delay in Rx side again
Measurement example
(7) differential delay with Through mode
When it adds delay in Through mode, it set through mode in “Port Setting” and check “differential
delay”.
36 / 45
(1)
Create Tx stream
Select the Tx Stream tab and fetch
the Tx Data Setting screen. Click the
Add button to register a new Tx
stream. The transmitted data
contents MAC/IP address,
transmitted load, transmitted data
repetition pattern are defined in the
Tx stream. Up to 256 streams can be
registered.
Setting GFP frame as EoS transmitting data
-This setup is enabled when the port mapping setting is Frame mapped GFP.
Tx stream
The GFP Tx tab contains settings required for the ARP and Ping auto-reply
function. When using neither the ARP nor Ping functions, these settings are not
required.
5.
5.
Measurement
Measurement
-
-
EoS test (1)
EoS test (1)
18
