15 / 45
¾
Choose
VCG members and Provisioned channels
manually:
Click “Add/Remove mode”. And choose channel from this
area. A channel becomes VCG member by “Single Click”
and becomes Provisioned channel by “Double Click”.
4.
4.
Setting Concatenation
Setting Concatenation
-
-
Virtual (5)
Virtual (5)
HO-VCAT
LO-VCAT
Finish to set concatenation,
see
(5);
Finish to set concatenation,
see
(5);
It is possible to change SQ
for each channel in “SQ
Setting mode”.
It is possible to choose
channel across any AUG
by this TAB in LO-VCAT.
16 / 45
(5) Check Linkup
When it completes to set concatenation for both Tx and Rx side, the port icon
becomes green from red. And any alarm/error have gone.
4.
4.
Setting Concatenation
Setting Concatenation
-
-
Virtual (6)
Virtual (6)
Linkup
If an error/alarm occurs,
please check counter to get
detail information,
see
5-(4-1);
8
