19 / 45
(3) Set Tx CTRL Value
Choose a Tx CTRL Value.
It recommends “---> DNU” because LCAS equipment also become “DNU” when it receive MST-Fail.
5.
5.
Measurement
Measurement
-
-
LCAS test (2)
LCAS test (2)
(4) Negotiation ON
Check this box to start LCAS negotiation.
20 / 45
(5) Check a current LCAS status
It is possible to check a summary of LCAS condition for both Source and Sink side like channel,
SQ, MST, CTRL and so on in real time. Before change add/remove channel, you should confirm
a current status of LCAS. You can also get a status of each channel as graphic in Status mode.
5.
5.
Measurement
Measurement
-
-
LCAS test (3)
LCAS test (3)
If you need GID, Rs-
Ack and Invert
information, use
monitor screen.
10