Anritsu MD1230B-26, Руководство по эксплуатации, Страница: 71 / 102

3.2 Control Bar
3-5
3
Measurem
ent
3.2 Control Bar
The Control Bar is used for traffic measurement.
During Auto measurement
Fig. 3.2-1 Control Bar (Auto measurement)
Table 3.2-1 Components of Control Bar (Auto measurement)
Components of Control
Bar
Description
1
Move up/down
button
Moves the Control Bar to the top/bottom
of the screen (above the Status Bar).
2
Close button
Hides the Control Bar.
Select [View] - [Control Bar] checkbox to
redisplay at Main menu.
3
Use checkbox
Used to select the port pair to use.
Initial value: checked
4
Status indication
Indicates port status (Ready / Starting /
Running / Stopping).
5
Session count
indication
Indicates the number of established/set
PPPoE sessions. (When protocol type of
client is PPPoE)
6
Server/Client
indication
Indicates server or client.
7 Port button
Displays the Physical window of each
port. (Refer to Section 2.2.1 “Physical”)
8
Connection speed
indication
Indicates the connection speed and
communication method.
9
Connection status
indicator
Shows the port pair connection.
10
Start/Stop button
Starts measurement.
This changes to [Stop] button during
measurement.
11
Auto and
Manual radio
buttons
Used to switch between Auto/Manual
measurement by selecting the Auto or
Manual radio button.
Initial value: Auto
12
Repeat
Sets the measurement repeat count
during Auto measurement. This is
disabled during Manual measurement.
Initial value: 1
1 2 4
5
6 7 8 9 11
10 12
3