Anritsu MD1230B-26, Руководство по эксплуатации, Страница: 21 / 102

1.4 Starting Application
1-7
1
Overvi
ew
3. Open the {Firmware Functionality} tab and select [PPPoE] from the
Unit list.
Fig. 1.4-2 Setup Utility (Firmware Functionality tab)
4. Press the [Apply] button and then click OK at the displayed dialog
to start the change operation mode processing.
Wait until the operation mode is changed completely.
5. When the operation mode is changed, the [Exit] button is enabled.
Press the [Exit] button to terminate the Setup utility.
Notes:
1. Only one module can be used in PPPoE mode.
The module to be used is displayed with highlighted solid
characters and unused modules are grayed out.
For details, refer to Section 1.3 "Usage Restrictions"
2. To return the main unit from the PPPoE mode to the normal
mode, select [Default] from the Unit list and then click the
[Apply] button.
3. Sometimes a module does not become available even when a
supported module is installed. In such case, press the [Apply]
button again.