Anritsu MD1230B-26, Руководство по эксплуатации, Страница: 52 / 102

Section 2 Settings
2-22
■ Ports for when client uses Ethernet protocol
Set the MAC address of the client.
Fig. 2.3.3-7 Address tab of the Node window (Ethernet client)
Table 2.3.3-5 Parameter setting on the Address tab of the Node
window (Ethernet client)
Setting Item and
Parameter
Description
• Static
• Increment
Select the IP/MAC address setting method.
Initial value: Static
[IP & MAC
Address...]
When the displayed IP/MAC Address setting
method is “Static”, a combination of the IP
Address and MAC Address is set.This dialog
can control 1000 items.
via Gateway
If the traffic goes through a gateway, select
this checkbox and set the gateway address.
Initial value: 0.0.0.0
IP Address
When the displayed IP/MAC Address setting
method is “Increment”, the start IP Address
is set.
Initial value: 0.0.0.0
MAC Address
When the displayed IP/MAC Address setting
method is “Increment”, the start MAC
Address is set.
Initial value: 00-00-00-00-00-00