Anolis ArcPower 16x12, Руководство пользователя

Страница: 17 / 23

17
8.3 Manual mode
Use this menu for control the fixture without connected DMX console.
Man.C. --- Manual effect control. Select this menu to control all channels via buttons of the control board.
To control fixture channels.
1. Use the UP/DOWN buttons to find “ Man.C“ menu.
. Press the ENTER button.
3. Use the UP/DOWN buttons to select desired effect (channel).
List of control channels:
“rEd.1-rE.16” - red LEDs saturations
“GrE.1.-Gr.16 “ - green LEDs saturations
“bLu.1-bL.16 “ - blue LEDs saturations
“Stro.“ - a strobe, shutter
“dinr“ - a dimmer
4. Press the ENTER button and use the UP/DOWN buttons to set value , press the ENTER button to
confirm it.
8.4 Test sequences
Use the item to run a demo-test sequences without an external controller,which will show you some possibili-
ties of using the fixture.
8.5 Stand-alone mode
Use this menu to run a program or to set a running program in the stand-alone operation - operation without
connected DMX controller
Auto --- Presetting playback .This function allows you to select the program which will be played continuously
in a loop after switching the fixture on.The fixture has two freely-programmable programs (EPG1-EPG2).
OFF --- The option disables "Auto" function.
tESt --- test program
EPG.1 --- program No.1
EPG.2
--- program No.
PLAY
---
Playing program
.Select this menu to run a desired program immediately.
tESt
--- The option starts test program
EPG.1
--- The option starts editable program No.1
EPG.2
--- The option starts editable program No.
Select the program you wish and press [ENTER].The selected program starts running.By Pressing [ENTER]
again is possible to pause the program running.
Edit --- Editing a program . The fixture offers 2 freely editable programs (EPG.1, EPG.2) each up to 64 steps.
Every program step includes a fade time-the time taken by the step´s channel status to reach the desired level
and a step time-the total time occupied by the step in the program.
E.g. If “F.tim.“=5 second and “S.tim.“=20 second, effects will go to the desired position during 5 seconds and
after that they will stay in this position for 15 seconds before going to the next prog. step
1. Use the UP/DOWN buttons to find “ St.AL.“ menu and press the ENTER button.
2. Use the UP/DOWN buttons to select “Edit“ menu and press the ENTER button.
3. Use the UP/DOWN buttons to select a program you want to edit (EPG.1, EPG.) and press ENTER
button.
4. Use the UP/DOWN buttons to select a desired program step ("St.01" - "St.64") and press ENTER
button.
5. Use the UP/DOWN buttons to select a channel you want to edit and press the ENTER button.
List of editable items:
“P.End” - a total number of the program steps (value 1-64). This value should be set before start