anko FP9053KB-GS, Руководство пользователя

Страница: 8 / 12

7
4. Place the lid onto the chopping jar and turn it clockwise until the tab of the lid clicks
into slot in the jar handle. Make sure it is locked in position correctly, otherwise the
appliance will not operate.
5. Turn the speed selector to “1” or “2” setting to start.
Note: the shredding/slicing/chipping disks can slice thickly-potatoes, onions, thinly-cucumbers, beetroot,
apples, and carrots…
1. Use the food pusher to feed food into the feeding funnel. The food shall be cut into proper size
(approx. L: 120mm, W: 60mm, H: 25mm) suitable for the feeding funnel. You can slice/chip up to
500g of food.
2.
Warning: The maximum operating time is 90 seconds. Allow it to rest for 2 minutes before using
it again. After 3 cycles of operation, allow the electric motor to cool down to room temperature
for approximate 30 minutes before using it again.
3. Turn the speed selector to “0” position and unplug unit after processing. Remove the blade assembly.
Unlock jar by turning it in anti-clockwise away from its base, and lift it off. Empty the processed
food.
CLEANING
1. Disconnect the power supply before cleaning.
2. Empty the chopping jar and remove the disk stand from the bowl. Then remove the shredding/ slicing/
chipping blade from the disk stand, the pusher from the lid, and the lid from the bowl. Immerse the
lid, pusher, chopping jar, disk stand and the shredding/slicing/chipping blade in water and clean them
with a soft brush.
CAUTION: The blade is extremely sharp, handle with care.
Note: For assembling the blade into the disk stand, firstly push the side without tab into the disk stand,
then push the other side in position. For disassembling, firstly push the side with tab outwards and then
push the other side out of the disk stand.
3. Wipe the outside of base with cloth. Never immerse it in water as electric shock is possible to occur.
Then dry thoroughly. Ensure the interlock area is free of food particles
Note : Some food may discolor the disk stand. This is normal and will not harm the plastic or affect the
flavor of food. Rub with cloth dipped with vegetable oil to remove discoloration
TECHNICAL SPECIFICATION
Voltage: 220-240V~ 50-60Hz
Power: 500W