8
4. After finish blending, move the jar out of the jar support pad, and then carefully remove the
measuring cup and jar lid, then pour and serve.
CAUTION: The speed dial and power switch must be at “STOP” and “OFF” positions
and the power supply cord must be disconnected from mains power outlet before
removing the jar.
SOUP (HEATING) FUNCTION
IMPORTANT! Never operate the blender without the jar lid in place.
IMPORTANT! Never leave the appliance unattended during use.
IMPORTANT! The soup function is for heating only and does not cook raw food. Food
must be pre-cooked prior to using it in the blender.
1. Place the appliance on the flat horizontal surface and make sure it is not connected to mains
power.
2. Remove the measuring cup and jar lid, and then put the required ingredients into the jar and
fill the jar with appropriate amount of warm water.
The amount of mixture must not exceed
1000ml.
And then fit the jar lid and measuring cup properly.
3. Connect the appliance to mains power, and then push the power switch to
“ON”
position.
4. Push the function switch to
“Soup”
setting and the appliance will start the soup blending and
heating
process.
5. After cooking for approximately 6 minutes, turn the speed dial to
“STOP”
position.
NOTE: The blender can heat soup to approximately 75
0
C after 6 minutes.
