9. How do I enable the WPS setting?
Note:
WPS allows you to quickly enable security encryption between your Anker
device and your router without having to enter the device's configuration page.
However, to reduce potential network exceptions and unnecessary troubleshooting,
we recommend that users not use WPS and instead select the WPA standard for the
highest security level of Wi-Fi encryption.
10. How do I contact the Anker service and support team?
Our networking products carry a full 12-month warranty. If you have any concerns
about the product or our service within this warranty period, you are welcome to reach
us via the contact information printed on the back of this guide, and our friendly
service team will be happy to assist you.
Enable WPS for your Anker device in Repeater or Client mode:
With your Anker device set to
Repeater
or
Client
mode, power up both your device
and your router and position them close to one another.
Press the WPS button located on your router and on the Anker device. The WPS
LED indicators will light.
When the Anker WPS LED indicator begins to flash, the automatic setup of a WPS
connection has begun. Please wait 3 minutes until the Anker WPS LED indicator
remains steadily lit to show that the WPS connection was successful.
Your router and Anker device can now be positioned in your desired locations.
Power off both your router and Anker device and place them in your desired
locations. Then power on both devices and allow a full restart for ongoing Internet
connection with WPS mode.
Connect to the Internet
For Repeater mode:
On your computer, find the Anker-Repeater network from the
list of available networks and connect.
For Client mode:
Please disconnect the Anker device from your computer, and
instead connect to your non-Wi-Fi device such as your set-top box using a network
cable. This connected device can now enjoy Internet access.
1.
2.
3.
4.
5.
19
