Congratulations! You should now be able to surf the Internet with a strong Wi-Fi
signal from your newly configured 4-in-1 Anker Compact Wi-Fi Repeater.
Step 3. Connect Computer to Your Device.
Connect your computer to the Anker device
Please plug one end of the included network cable into the device, and the
other end to the network port of your computer.
Note:
This is necessary to complete setting configuration beforehand even if you
want to wirelessly connect and provide your set-top box with Internet access
later.
3.1
3.2
Step 4. Configure the Device According the Selected Mode
Step 5. Connect to the Wireless Web
Logon to the device's configuration page
Open a web browser on your computer, and type 192.168.100.253 to reach the
device's configuration page. When the log-on dialogue is displayed, enter your
default UserName/Password: admin/admin to logon to the Anker device's
configuration web page.
Configure the device
4.1
4.2
Click
Site Survey
and identify the wireless network of your router or modem
from the ist of available networks. Please ensure that the signal strength is
above 80%, select it and click
Next
.
Input the
PassPhrase
of your router or modem to allow your Anker device to
connect to the network.
Click
Finish
to apply the settings. Wait 2 minutes to allow a full restart.
After the device fully restarts, connect to the wireless web via it.
Your setup is completed, and your newly configured Anker device can now receive
your existing Wi-Fi signal. Please disconnect the Anker device from your computer,
and instead connect to your non-Wi-Fi device such as your set-top box using a
network cable. This connected device can now enjoy Internet access.
You may move your Anker device to different locations as your needs demand. Your
settings will be saved. For optimal performance, always ensure that the wireless
router signal that the device receives is strong (ideally 80%).
a.
b.
c.
12
