Anite NEMO FSR1, Руководство пользователя, Страница: 87 / 137

PC T EL 8 7
∇
Starting the PCTEL LX GSM/WCDMA dual-mode scanner
1. Start Nemo Outdoor. Do not load any previous device configuration if asked.
2. From the Measurement menu, select Add New Device .
3. Click on Scanner .
4. From the list select PCTEL LX GSM 900/1800 and click Next .
5. In the Scanner Properties dialog, Port field you should see two consecutive COM ports
(e.g., COM 3 and COM 4). Select the COM port with the smaller number and click OK .
6. From the Measurement menu, select Add New Device . Click on Scanner .
7. From the list select PCTEL LX UMTS 2100 and click Next .
8. In the Scanner Properties dialog, Port field you should see two consecutive COM ports
(e.g., COM 3 and COM 4). Select the COM port with the bigger number and click OK .
9. A green light should be blinking in the Device Status for both devices. This means that the
devices are working properly and scanning using the default settings. If the status field
displays, Device is not started, check that you are in online mode (click the Work
Offline/Online button ).
10. The GSM and UMTS scanners will appear as separate devices and must be configured
individually.