A n r it s u
5 1
Pilot Scrambling Code Scanning
Pilot Scrambling Code Scanning or Known Scrambling Code Scanning can be used to scan
known pilots. The Known Scrambling Code Scanning will from now on be referred to as Normal
Pilot Mode.
1. Open the Measurement Properties dialog by selecting
Measurement
|
<device>
|
General
Properties
.
1. Go to the
Measurement Properties, Pilot scanning, UMTS
page
.
2. Clear the TOP-N mode option and click the
Select Channels
button. The
Select
Scrambling Codes
dialog is opened.
3. Select channels in the
Selected channel numbers
table by clicking the
Select
button.
♦
With the Anritsu ML8720B single carrier scanner only one channel can be selected. If you
are measuring with the Anritsu ML8720B-03 dual carrier scanner, two channels can be
selected.
4. For each selected channel, select scrambling codes. Select a channel and click the
Select
button below the
Selected scrambling codes
table.
5. Click
OK
to return to the
Measurement Properties
dialog.
Содержание NEMO FSR1
Страница 1: ...Version 6 20 SCANNER GUIDE...