Anita GZ-539-407, Руководство пользователя

Страница: 20 / 39

ANITA©
Serie GZ-539
20
8.4. Checking the function of start inhibitor
Picture 17
•
Switch the machina on at the main switch and tilt back the sewing head.
•
The error message must appear on the kontrol panel.
•
If the message does not appear, check the setting of safety switch.
9. PREPARATION
All regulations and instructions in this Instruction Manual are to be observed!
Special attention is to be paid to the safety regulations!
All preparation work is only be carried out by appropriately trained
personnel. Before all preparation work, the machine is to be separated from
the electricity supply by removing the plug from the mains or switching off
the On/Off switch!
9.1. Inserting the needle
●
Raise needle bar.
●
Loosen screw 1 and insert
needle 2 until you feel it
stop.
●
Insert needle 2 as far as
possible. The long needle
groove must be facing
forwards.
●
Tighten screw 1.
Picture 18