Animo OptiFresh Bean Touch, Сервисная книжка

Страница: 118 / 136

118 2017/09 Rev. 0.0
OptiFresh (Bean) Touch
10.3 Display messages during use
Display Possible cause Action
RINSINg
Rinse program not activated
in time.
Run the rinse program and follow
the instructions in the display.
See chapter 6. Maintenance / 6.1
daily rinsing program
CLEANINg
Cleaning program is not
activated in time.
Run the cleaning program and
follow the instructions in the
display.
See chapter 6. Maintenance / 6.2
Weekly rinsing program
REPLACE
BREWER FILER
Brewer filter should be
replaced with a clean one.
Replace brewer filter.
See chapter 6. Maintenance / 6.3
Change brewer filter
SERVICE BOILER
Boiler needs maintenance.
See chapter 6.4 Periodic maintenance /
6.4.1 Service boiler.
SERVICE BREWER
Brewer needs maintenance.
See chapter 6.4 Periodic maintenance /
6.4.2 Service brewer and 6.5.1 Servicing
WASTE BIN ALMOST
FULL
Waste bin need to be emptied
shortly.
If you wait to long the machine blocks when
the bin is full
BOILER FILLINg
When used for the first time:
boiler is still empty and is
being filled.
No action required. When boiler reaches
the appropriate level, the display will show
‘Boiler heating’.
During use: boiler is not filling
up or is filling up too slowly.
After 60 sec. the display will
show ‘E3 Level error’.
Check the water pressure, turn the water
supply tap completely open and check the
connection tube for any kinks.
BOILER HEATINg
The boiler temperature is
(temporarily) too low because
too much water has been
used.
Once the temperature is restored, the
message automatically disappears and the
drink selection buttons are reactivated.
DRIP TRAY FULL
Drip tray full.
Once the drip tray is emptied, the message
automatically disappears and the drink
selection buttons are reactivated.