Animo OptiFresh Bean Touch, Сервисная книжка

Страница: 76 / 136

76 2017/09 Rev. 0.0
OptiFresh (Bean) Touch
Service menu continued ...
Main item Sub-item Item Description
2.08
READ lOG FIlE
ERROR LOg Last 20 error messages including time and date will be saved
CLEANINg LOg Last 31 cleaning actions including time and date will be saved
RINSE LOg Last 31 rinsing actions including time and date will be saved
2.09
ERASE lOG
Are you sure? Log will be erased
2.10
lOAD DEFAUlTS
# See Section
1.2 Model code
MODEL #
OF1
OF4
TYPE CODE
Stand
3F1A
3FAA
The defaults must be loaded when a new circuit board is installed.
When loading the defaults, the OptiFresh Touch model stated on the
type plate must be set. Only after confirming the question ‘are you
sure?’ the right model settings will be loaded.
Note;
● When you confirm this setting, all factory settings are loaded into
the control and all changed programmed values are lost.
● After loading the defaults, the PIN code is 2-2-2-2-2 again and the
language is set to English again. Change if necessary.