Animo OptiBean Touch Скачать руководство пользователя страница 122

Страница: 122 / 126

122

OptiBean (XL) Touch

2018/02 Rev. 0.4

12.1.7 Accepting tokens only (no euros)

Do the steps in sections 12.1.3 and 12.1.4 beforehand.
1. Open the service menu

2. Set to TOKEN using menu 2.2 Button settings /

Button 1-12 / Price.

3. Block the € 0.05 - € 2.00 coins using the coin

mechanism DIL switches and the table below.

4. The recipe buttons are only activated after a token

is inserted!

Coin €

Coin £

€ 0.05

S1-1

S1-7

£ 0.05

S1-1

€ 0.10

S1-2

S1-8

£ 0.10

S1-2

€ 0.20

S1-3

S2-1

£ 0.20

S1-3

€ 0.50

S1-4

S2-2

£ 0.50

S1-4

S2-1

€ 1.00

S1-5

S2-3

£ 1.00

S1-5

S1-7

€ 2.00

S1-6

S2-4

£ 2.00

S1-6

S1-8

£ 0.05 new

S1-4

ON = locked / OFF = free

£ 0.10 new

S1-5

12.1.8 Coin channel cleaning

From time to time, the coin mechanism should be

cleaned with a light, damp cloth (lukewarm water

containing a mild cleaning agent).
No further maintenance is necessary.

WARNING

• The cloth must not be so wet that liquid enters

into the system, causing the circuit board to be
damaged.

• Do not use any solvents and/or abrasive cleaning

agents that could damage the plastic.

• We advise to use a water-free surface cleaner (e.g.,

Surface 95) to remove grease and dirt from the coin
channel.

1. Turn off the device.

2. Take the coin mechanism out of the side panel.

3. Carefully open the coin holder valve and hold it open.

4. Clean the coin holder with a cloth and close the

valve again.

5. Turn on the device again.

Содержание OptiBean Touch































































































































Результаты поиска

Содержание OptiBean Touch

Отзывы:

Похожие инструкции для OptiBean Touch

Бренды по названию

Популярные бренды

Animo OptiBean Touch, Сервисная книжка

Результаты поиска

Содержание OptiBean Touch

Отзывы:

Похожие инструкции для OptiBean Touch

Бренды по названию

Популярные бренды