- 14 -
3354462_ATG_inst_GB
ENGLISH
GB
TESTING OF THE APPLIANCE
Important
Before it is put into service, the system must be tested to check the operating conditions of
every single component and identify any malfunctions.
In this stage, it is important to check that all health and safety requirements have been
complied with in full.
To test the system, make the following checks.
1)
Turn on the gas and water supply taps and check that the connections are tight.
2)
Turn on the master switch to check the electrical connection.
3)
Check that the mains gas is the same as that used for commissioning of the appliance, and
carry out the conversion procedure if necessary (see page 13).
4)
Check that the gas pressure conforms to the values stated in the table at the back of the man-
ual.
5)
Check that the combustion exhaust gases comply with the requirements (see page 15).
6)
Check that the safety device is operating correctly.
7)
Carry out a cooking cycle without food to ensure that the appliance is operating correctly.
After testing, if necessary instruct the user in all the skills necessary for putting the appliance into
operation in conditions of safety, in accordance with legal requirements.
Important
During performance of the test procedure and on completion of the operation, make sure
that there are no gas leaks or malfunctions.
