C1
39
60
36
00
.fm
- 9 -
IT
AUS
DE
FR
ES
If the safety thermostat is tripped, the appliance has to
be restored to the initial working conditions as follows.
1- Allow the oil to cool to 30-40°C.
2 - Open the hatch (
A
).
3 - Press the button (
B
) of the safety thermostat
tripped to restore the gas supply.
4 - Close the hatch (
A
).
If the appliance is to be out of use for a lengthy period,
proceed as follows:
1- turn off the gas supply tap;
2 - clean the appliance and the surrounding areas
thoroughly;
3 - spread a film of edible oil over the stainless steel
surfaces;
4 - carry out all the servicing procedures;
5 - leave the appliance uncovered and the cooking
chambers open.
To ensure correct use of the appliance, the following
rules should be adopted:
– use only the accessories recommended by the
constructor;
– use the baskets as appropriate;
– before filling the well, check that the drain tap (
A
) is
turned off;
– check that the oil level never drops underneath the
minimum level marked (
B
);
– use single-seed oils or blends of oils specially rec-
ommended for fryers;
– melt solid fats in a separate container to avoid dam-
aging the appliance;
– do not use the appliance until the oil is at working
temperature;
– lower the basket slowly to prevent foaming;
– filter the frying oil often to remove working residues;
– never use the appliance with no oil in the well, as
this may damage its structure;
– use the basket hanger support to drain the foods
fried;
– if the appliance is to be out of use for a short time, re-
duce the oil temperature to the minimum level or
switch off the appliance to prevent unnecessary
gas consumption and ageing of the oil;
– change the oil when it fumes between 160 and
180°C or when it becomes dark in colour.
RESETTING THE APPLIANCE
LENGTHY APPLIANCE DOWNTIMES
USEFUL ADVICE FOR USE
B
A
IDM-39603311000.tif
B
A
IDM-39603310900.tif
