- 6 -
IT
AUS
DE
FR
ES
DESCRIPTION OF CONTROLS
The appliance is fitted with the controls for use of its
main functions.
A)Temperature regulator knob
:
regulates the gas
supply to increase or decrease the oil temperature.
B)Burner control knob
:
lights and turns off the relative
burner and pilot light.
C)Mains light
:
comes on to indicate that the appliance is
receiving gas and so the burner can be lit.
D)Temperature light
:
comes on to warn that the oil is not
yet at the preset temperature; the light goes out when
the temperature is reached.
USE AND OPERATION
4
RECOMMENDATIONS FOR USE
Important
The rate of accidents deriving from the use of
appliances depends on many factors which
cannot always be foreseen and controlled.
Some accidents may be caused by unpredict-
able environmental factors, while others are
due above all to the behaviour of users. As
well as receiving authorisation and appropri-
ate instruction, if necessary, the first time they
use the appliance, users must carry out a few
simulated practice operations in order to get
to know the controls and the main functions.
Use only as intended by the constructor and
never tamper with any device to obtain per-
formance levels outside the rated specifica-
tions.
Before use, check that the safety devices are
properly installed and in good working order.
As well as taking care to meet these require-
ments, users must also implement all safety
regulations and read the description of the
controls and the start-up procedure carefully.
IDM-39603310600.tif
A
B
C
D
C
A
D
D
C
A
B
Appliance on marker
Off marker
Temperature marker
Off marker
Pilot light marker
Burner on marker
