C1
39
60
330
0_
2.f
m
- 19 -
IT
AUS
DE
FR
ES
REPLACING PARTS
9
RECOMMENDATIONS FOR REPLACING PARTS
Before carrying out any replacement procedure, acti-
vate all the safety devices provided and decide whether
staff at work and those in the vicinity should be informed.
In particular, turn off the gas supply tap and prevent ac-
cess to all devices which might cause unexpected
health and safety hazards if turned on.
If work parts have to be replaced, use original spare
parts only.
The manufacturer declines all responsibly for injury or
damage to components due to the use of non original
parts, or extraordinary work on the appliance which
may modify the safety requirements without the man-
ufacturer's authorisation.
When ordering components, follow the instructions
provided in the parts catalogue.
REPLACEMENT OF THE BURNER NOZZLE
To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Open the door (
A
).
3 - Unscrew the nozzle (
B
) and replace it with the one
suitable for the type of gas in use (see table at
back of manual).
4 - Close the door (
A
).
REPLACEMENT OF THE PILOT LIGHT INJECTOR
To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Open the door (
A
).
3 - Unscrew the union (
B
).
4 - Extract the nozzle (
C
) and replace it with the one
suitable for the type of gas in use (see table at
back of manual).
5 - Screw the union (
B
) back in place and close the
door(
A
).
DECOMMISSIONING THE APPLIANCE
Important
This operation must be carried out by skilled
operatives in compliance with the legal re-
quirements with regard to safety at work.
Never dump non-biodegradable materials, lu-
bricating oils and non-metallic components
(rubber, PVC, resins, etc.) in the environment.
Dispose of them in accordance with the rele-
vant legal requirements.
A
B
IDM-39603311700.tif
IDM-39603311800.tif
A
B
C
