IT
GB
DE
FR
ES
- 4 -
C
1
39
6156
00
.f
m
English
IT
GB
DE
FR
ES
Although the appliance is complete with all safety
devices, during installation and connection addi-
tional devices must be added if necessary to com-
ply with the relevant legal requirements.
The illustration shows the position of the devices.
A)Safety thermostat
: to cut off the electricity sup-
ply in case of overheating.
Caution - warning
Make a daily check that the safety devices are
properly installed and in good working order.
The illustration shows the position of the signs
provided.
A)Nameplate with manufacturer and appli-
ance data
.
B)Burn hazard
: watch out for hot surfaces.
C)General hazard
: read the manual carefully be-
fore carrying out any procedure.
D)General hazard
: when washing the appliance do
not point pressurised water jets at internal parts.
E)General hazard
: dry operation is forbidden.
F) General hazard
: all relevant regulations must be
complied with. "Install in compliance with the rele-
vant regulations and use in well ventilated premises
only".
G)General hazard
: all relevant regulations must be
complied with. "No liability is accepted in case of fail-
ure to comply with the installation and commission-
ing instructions".
H)CE marking
: indicates that the appliance is compli-
ant with the relevant norms.
L) WEEE symbol
: indicates that the appliance is sub-
ject to specific waste disposal regulations.
SAFETY DEVICES
SAFETY AND INFORMATION SIGNS
A
IDM-39615600200.tif
D
G
L
IDM-39615600300.tif
E
H
F
C
A
B
