C
1
39
6157
00
.f
m
- 5 -
English
IT
GB
DE
FR
ES
The appliance can be equipped with the following
accessories on request.
A)
Containers
B)
Bridging bars for containers
C)
"Over cupboard" installation kit (see page 12)
D)
"Bridge" installation kit (see page 12)
E)
Supporting beam kit (see page 12)
OPTIONAL ACCESSORIES
During design and construction, the constructor has
paid special attention to factors which may cause
risks to the health and safety of the people interact-
ing with the appliance. As well as complying with
the relative legal requirements, he has adopted all
the "rules of good construction practice”. This infor-
mation is provided to encourage users to take spe-
cial care in order to prevent all risks. However, there
is no replacement for care and attention. Safety
also depends on all the operators who interact with
the appliance.
Read the instructions provided in the manual sup-
plied and those applied to the appliance itself with
care, paying special attention to those relating to
safety.
Never tamper with, elude, eliminate or bypass the
safety devices installed. Failure to comply with this
rule may cause serious risks to health and safety.
Even after you have read all the appropriate docu-
mentation, if necessary on first use carry out a few
trial operations to get to know the controls, espe-
cially those used for switching on and off.
Use the appliance only for the functions intended by
the manufacturer. Improper use of the appliance
may involve health and safety risks and economic
losses.
All servicing operations requiring specific technical
knowledge or skills must only be carried out by
qualified staff with recognised experience in
the specific sector.
To maintain hygiene and protect the food
processed from all forms of contamination, all
elements in direct or indirect contact with food-
stuffs and all surrounding zones must be cleaned
thoroughly. For these operations, use only food-ap-
proved detergents, and never use flammable prod-
ucts or products which contain substances harmful
to health. Clean only when reasonably necessary
and at the end of each session of use.
After each session of use, make sure that the con-
trol knobs have been turned off and the power sup-
ply lines disconnected.
In case of lengthy downtimes, as well as discon-
necting all supply lines it is also essential to clean
all internal and external parts of the appliance and
the surrounding environment thoroughly, complying
with the constructor's instructions and the relevant
legal requirements.
During routine use of the appliance, the Operator's
constant presence is required.
When washing the appliance do not point pressu-
rised water jets at internal parts.
Do not leave flammable objects or materials close
to the appliance.
SAFETY
3
SAFETY REGULATIONS
BGN 1/1 BGN 2/3 BGN 1/2 BGN 1/3
BGN 1/6
TRA 11
TRA 12
TRA 16
A
B
IDM-39603606500.tif
