Anga AQ-5604LAHD, Руководство по эксплуатации пользователя

Страница: 40 / 107

4.2 Record
4.2.1 Record Config
Set the recording parameters in the surveillance channel. The system is set 24
hours consecutive recording in the first startup. You can enter <Main Menu>
<Recording function> <Recording setup> to set.
There is at least one read-write hard disk.(refer to chapter 4.5.1)
Figure 4.1 Record Config
<Channel> Choose the corresponding channel number to set the channel.
Choose the all option to set the entire channels.
<Redundancy> Choose the redundancy function option to implement the file
double backup function. Double backup is writing the video
files in two hard disks. When you do the double backup,
make sure that there are two hard disks installed. One is
read-write disk and the other is redundant disk. (refer to
4.5.1).
<Length> Set the time length of each video file. 60minutes is default value.
<PreRecord> Record 1-30 seconds before the action. (Time length is decided
by the code stream).
<Record mode> Set video state: schedule, manual or stop.
26