Anga AQ-5604LAHD Скачать руководство пользователя страница 60

Страница: 60 / 107

<Port>

<UPNP>

It’s a port of mobile monitoring which you need to make a router
mapping of if want to visit it by mobile.

UPNP protocol can auto port forwarding on router, make sure

UPNP is running on router before use it.

Figure 4.27

<Enable> Choose Enable to make sure all UPNP settings available.

<HTTP>

<TCP>

Route will automatically distribute HTTP port for the device, when
IE viewing, it needs this port (e.g. 60.12.9.26:66)

Router will automatically distribute TCP port for the device, when

monitoring via CMS, it need this port.

<Mobile Port> Router will automatically distribute Mobile Port for the device,

when mobile monitor, it need this port.

4.4.5 GUI Display

Configure the video output parameters including the front output mode and
code output mode.

Front output: In the local preview mode include: channel title, time display,

channel title, record status, alarm status, bit rate info,
transparency and region cover.

Code output: In the network surveillance and video file mode include:

channel title, time display, channel title, record status, alarm
status, bit rate info, transparency and region cover.

Содержание AQ-5604LAHD












































































































Результаты поиска

Содержание AQ-5604LAHD

Отзывы:

Бренды по названию

Популярные бренды

Anga AQ-5604LAHD, Руководство по эксплуатации пользователя

Результаты поиска

Содержание AQ-5604LAHD

Отзывы:

Бренды по названию

Популярные бренды