Anga AQ-5604LAHD, Руководство по эксплуатации пользователя

Страница: 33 / 107

Cruise lines are connected by multiple preset points, setting procedure is as
follows:
Step1: In Figure 3.10, the Direction key will turn PTZ to designated
location, click Settings button to enter Figure 3.13.
Step 2: Click Cruise buttons, the write proper value into the Cruise
Line and Preset Points blank
，
then click Add Preset Points
button, complete setting (also can add and delete cruise line
which has been set up).
Step 3: Repeat step1 and step2, until set out all the preset designated
cruise lines.
Remove Preset: Please input preset value in the blank, click Remove Preset
button, then remove the preset points.
Remove Cruise Line: Input the number of cruise line, click Remove Cruise
Lines button, then remove the cruise lines set.
Figure 3.13 Cruise Between Points Setting
2) The Calls of Cruise between Points
In Figure 3.10, click Page Shift button, enter PTZ control menu as shown in
Figure 3.12. Please input the number of cruise in the value blank, then click
Cruise between Points button, PTZ begins to work on the cruise line. Click
Stop button to stop cruise.
3. Scan
PTZ also can work on the preset scan line repeatedly.
19