Plug the card in one of the PCI-slots of your PC and switch on again. Start the setup.exe on the
CD. All related files are copied to the related directories.
2.3.3 D
RIVER
I
NSTALLATION
•
Windows 2000/ Windows XP
While Windows boots, it finds new hardware. Log in as
administrator
. Windows
TM
will mention,
that it has found new hardware on your computer. If the software is not yet on your computer, you
can copy the recommended files now to your hard disk.
Check the second point, which means “Treiber aus einer Liste auswählen”. Say OK and give the
path to the “lockin.inf” (for instance:
C:\Programme\Anfatec\LockIn\Driver
) with the button
“Durchsuchen” (“Search”). Check the driver “LockIn Interface” and finish with “Fertigstellen”
(“Finish””).
•
Later re-installation of a driver
Log in as administrator and call in the “System control” the topic "system". Chose the card
“hardware“ and open the “device manager”. It shows all hardware components installed on your
PC. With a double click on the "Anfatec Measurement Unit", the submenu "Anfatec Measurement
Unit" or “Anfatec LockIn” is opened. A second double click opens a window, which shows the
properties of the device.
Select the card “Driver” and start the button “Driver actualisation”. A dialogue is opened, which
asks: “Do you want to actualise the driver?”. In the next window please check the second option
“Search for a suitable driver” and click “OK”. At the question, where the driver is, the right path
has to be given as “other sources”. It is the path, where the new *.inf file is located. Eventually,
you have to select again the right device from a list of possible devices. Check the Anfatec
Measurement Unit again and say “OK” and “Finish”. The PC has to be rebooted in order to activate
the new driver.
2.4 C
ONNECTIONS
TO
THE
CARD
Manual Anfatec PCI-Lockin Amplifier AMU2.4 – Rev. 1.10 dated 30/09/20
Page 9 (70)
Figure 1: Photograph of the LockIn board and description of the location of the single parts.
