Anest Iwata MSG-200, Инструкция по эксплуатации, Страница: 10 / 16

-10-
Other precautions
1
．
Never alter this multi-spray gun.
If done, it can cause insufficient performance and failure.
2
．
Enter working areas of other equipment (robots, reciprocators, etc.) after machines are turned off.
If not, contact with them can cause injury.
3
．
Never spray foods or chemicals through this gun.
If done, it can cause accident by corrosion of fluid passages or adversely affect health by mixed foreign matter.
4. Securely connect fluid hose.
If hose is disconnected during operation, hazardous hose movement and paint ejection will cause severe bodily injury.
5
．
If something goes wrong, immediately stop operation and find the cause. Do not use again until you have solved the
problem.
2. Name of components and checking the product
① Pulling trigger makes air valve in gun body set open and atomizing air emits.
② Pulling trigger further makes fluid valve at gun tip (between fluid needle set and nozzle
gland set)open and paint emits.
③ Tightening stopper knob makes fluid valve unable to open and trigger is locked.
・
W hen you open the package, be sure to check that all goods are included and are in good
condition.
・ If there is any damage or missing components, do not use the product, to avoid danger
and immediately contact the distributor who sold it to you.
WARNING
body set
air cap set
atomizes fluid
filter set
removes dust
(#200 mesh)
fluid connection
G1/4
needle packing set
prevents paint leak
pattern adj. set
adjusts pattern width
model
MSG-200
stopper knob only
locks fluid output
(but it cannot adjust
fluid output)
Atomizing air
connection
G1/4
trigger
air adj. set
adjusts atomizing
air volume
accessories
cleaning brush
O ring
(for nozzle gland set)
cleaning needle
Instruction manual