Anest Iwata ISP-50, Инструкция по эксплуатации, Страница: 19 / 34

-17-
3.2 Test operation
CAUTION
Danger of exhaust disruption
Remove blank flange from inlet and outlet.
Operation with blank flange being fitted can disrupt air flow or cause blank flange to fly
by exhaust impetus, resulting in accident, failure, or bodily injury from contact with flying
objects.
Remove blank
flange
Danger of foreign matter entering inlet
When checking turning direction, be careful not to enter foreign matter into an
inlet. Foreign matter entering inlet can cause failure.
Prevent foreign
matter from entering
Danger of overheating
Check that cooling fan is turning and cooling air is flowing.
If not, it can cause accident, failure or bodily injury such as burns due to overheating.
Check fan
Test operation
①
Open inlet and outlet
Remove blank flanges (2 places)
from inlet and outlet of
vacuum pump.
②
Check turning direction
Open inlet, turn on electrical source
to start operating vacuum pump
and check that comes out of air
outlet.
If you fit pump to vacuum system
and control operation of vacuum
pump by remote control,
first check pump itself for turning direction and then fit it to vacuum system.
O-ring
Clamp
Blank flange
Turning
Turning Direction
plate