Anest Iwata E-M20 Series, Инструкция по эксплуатации

Страница: 41 / 70

⑤
Protection from solvents, air and fluid pressure
Use spray booth and do the painting job in a well-ventilated place. Painting and cleaning jobs
in a poorly ventilated site can cause organic solvent poisoning and ignition.
Always wear protective tool such as protective goggles and mask. If not, cleaning liquid can
touch eyes and skin, causing inflammation. If you feel something wrong with eyes or skin,
immediately consult with a doctor.
We recommend you to wear earplugs for your safety. Noise level can reach over 85db
（
A
）
depending on operating and working conditions.
Be sure to turn off electric source of electrostatic controller or multi-gun control system and
release fluid and air pressure before cleaning, disassembling or doing maintenance job or
during stoppage of job. If not, remaining pressure can cause bodily injury through wrong
operation and spattering of cleaning liquid. Be sure to follow [Avoidance of wrong operation ]
on page
④
in order to turn off electric source, and release air and fluid pressure.
Protection from static electricity
Be sure to wear electrostatic shoes
（
resistance figure 10
5
〜
10
8
Ω、
JIS T 8103
）
and
anti-charge working clothes
（
JIS T 8118
）
. If not, static electricity can accumulate on human
body and cause bodily accidents by electric shock.
Operators must not wear metallic things such as watch or key holders during operation. If
done, static electricity can accumulate on them and you will get an electric shock.
If you wear glasses with metallic frame and approach
the gun, you can get an electric shock.
Before approaching spray equipment, turn off electric
source of electrostatic controller or multi-gun control
system.
Operator must always hold electrostatic gun with bare hand or glove having a large hole at
palm position. As human body is grounded through the handle of electrostatic gun, static
electricity can accumulate on human body and cause bodily harm by electric shock if operator
holds the gun handle with normal glove.
When you turn off main electric source switch in order to stop the gun operation in an
emergency, it takes about 5 seconds till the electric potential of electrostatic gun goes down to
a safe level. Don’t try to touch the pin electrode at tip of gun during that period.
Anti-charge
working clothes
Electrostatic
shoes