Issue 2 14/07/16
51
Operating Instructions
5
5.7.3 To decrease Setpoint temperature
1. Depress and hold ‘Temperature Down’ button until desired
setpoint temperature appears in the display (Fig. 28).
2. ‘Setpoint’ indicator begins flashing in the display after
pressing ‘Temperature Down’ button (Fig. 29).
3. Press ‘SET’ button for new setting to take effect immediately.
‘Setpoint’ will stop flashing. If the ‘SET’ button is not pressed,
the new temperature setting will take effect in approximately
10 seconds (Fig. 30).
Fig. 28
‘Setpoint’
flashes
Fig. 29
‘Setpoint’
flashes
for 10 seconds
Press SET button
for setting to take
effect immediately
Fig. 30
