8
Making a bag with a bag roll
1.
Plug the appliance into a power source. Turn the
switch located at the back of the appliance to “I”.
2.
Open the top cover.
3.
Make sure the bag cutter is at one end of the cutter
rack. Lift and push back the cutter rack. (Fig. 1)
4.
Pull the bag roll to the length required. (Fig.2)
5.
Put the cutter rack down on top of the bag roll.
Slide the cutter from one side to the other, to cut the
bag. (Fig.3)
6.
Place one open end on the sealing strip, ensuring it
doesn’t enter the vacuum chamber. (Fig.4)
7.
Close the upper lid, pressing until it clicks into place.
(Fig.5)
8.
Press “Manual Seal” to start sealing the bag. (Fig.6)
9.
Once complete, lift the front handle to open the
cover. Take the bag out of the machine ready to fill.
(Fig.7)
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7