Andor Technology Neo sCMOS Скачать руководство пользователя страница 81

Страница: 81 / 86

APPENDIX

Neo

APPENDIX

Page 81

A2 - TERMS & CONDITIONS

1. In these Conditions:

‘

BUYER

’ means the person who accepts a quotation of the Seller for the sale of the Goods or whose order for

the Goods is accepted by the Seller.

‘GOODS’

means the goods (including any instalment of the goods or any parts for them) which the Seller is

to supply in accordance with these Conditions.

‘SELLER’

means Andor Technology plc.

‘CONDITIONS’

means the standard terms and conditions of sale set out in this document and (unless the

context otherwise requires) includes any special terms and conditions agreed in writing between the Buyer

and Seller.

‘CONTRACT’

means the contract for the purchase and sale of the Goods.

‘WRITING’

includes telex, cable, facsimile transmission and comparable means of communication.

2. Any reference in these Conditions to any provision of a statute shall be construed as a reference to that

provision as amended, re-enacted or extended at the relevant time.

3. The headings in these Conditions are for convenience only and shall not affect their interpretation.

Содержание Neo sCMOS























































































Результаты поиска

Содержание Neo sCMOS

Отзывы:

Бренды по названию

Популярные бренды

Andor Technology Neo sCMOS, Руководство по оборудованию

Результаты поиска

Содержание Neo sCMOS

Отзывы:

Бренды по названию

Популярные бренды